Detailed Info of IX-3190_8-97316602-0 Clutch Release Bearing
The clutch release bearing should move flexibly without sharp noise or stagnation, its axial clearance shall not exceed 0.60mm, and the wear of the inner ring must not exceed 0.30mm.
If the clutch release bearing fails to meet the above requirements, which means there is a failure. In this case, we must first determine which phenomenon belongs to the damage of the release bearing. After starting the engine, step on the clutch pedal gently, when the neutral movement has just been eliminated and the rustle occurs, continue to step on the clutch pedal. If the sound disappears, it means that it is not the fault of release bearing. If the rustle continuous, it means the release bearing malfunctions.
When checking, remove the clutch bottom cover, step on the accelerator pedal slightly to increase the engine speed. If the noise becomes louder, then observe the spark. If there are sparks, it means the clutch release bearing is damaged. If the sparks run out in strands, it means that the ball bearing is broken. If there is no spark but a sound of metal breakage, which indicates a excessive wear.